Preparation & Usage

Not recommended on rough surfaces, such as cement board, brick or rough-sawn wood. Failure to follow instructions carefully may cause damage. Apply 1. Apply to a smooth, clean and dry surface. Clean with rubbing alcohol. Do not use household cleaners. 2. Separate strips. Remove blue liner. Press adhesive to clip. 3. Remove black liner. Press firmly to surface for 30 seconds per clip. 4. Use one clip for every 2 feet of lights. 5. Wait 1 hour before hanging lights. Remove 1. Gently hold clip in place. 2. Never pull the strip towards you! Always pull straight down. 3. Stretch the strip slowly against the wall at least 6 inches to release. Clips can be reused with Command® Outdoor Small Refill Strips.

Features

Damage-free hanging

Holds strongly

Removes cleanly